TURBO series coil for pulse solenoid valve DIN43650A Pin 3  inner hole diameter 10.2mm  DC24V 10W

The TURBO coil for pulse jet valve is connect with DIN43650A connector , the normal voltage is AC220V DC24V AC110V , other voltage could be customized.

The reaction time of a DC solenoid can be shortened by applying a higher than the nominal voltage for a few milliseconds. This gives a similar effect to the inrush of an AC solenoid. When the armature reaches the end of its stroke, the voltage can be lowered to less than half nominal. This shortens the switch-off time and reduces heat.

The ascendancy is durable and stable , and all solenoids of this system could be sustain high temperature and high pressure , the working life would be used at least 100million cycles. 

Thermosetting material will help the coil more stable and safely.

Specifications:

Notes: please tell me the voltage you need ,if no remark ,
you will receive 24V DC .

The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65.
The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient conditions. For use in special ambients with high humidity, we suggest the sealed or thermoset version.

Note :

Drawings:

Application :

The suggested interface dimensions of the valve body are shown on the right side .
Any change to the prescribed dimensions can effect the performances of the solenoid operator .

The Turbo coil is fastened to the plunger guide tube by means of a knurled nut for ease of change over without interrupting the pneumatic circuit .
 

Competitive Advantage: